E-mail: info@yiheballs.com
Tel：
0086 13396336777
NEWS
Company NewsThe passivation process in ball production is a key step for enhancing the corrosion resistance and surface finish of the steel balls. This method creates a protective oxide layer on the surface of the steel balls through chemical means, which helps prevent further oxidation and corrosion of the material.
Principle of the Passivation Process：
Passivation involves a chemical reaction on the surface of the substrate to form a stable and microscopically uniform oxide film. For stainless steel balls, this oxide film is typically chromium oxide or other stable metal oxides that significantly enhance the material's corrosion resistance. This process generally occurs in a passivation solution, and factors such as solution type, concentration, treatment time, and temperature impact the effectiveness of the passivation.
Passivation Equipment：
Passivation Tank: A container used to hold the passivation solution, usually made from corrosion-resistant materials like polypropylene or stainless steel.
Cleaning Equipment: Used to clean the workpieces before and after passivation, typically including multi-stage washing systems.
Drying Equipment: Utilized to rapidly dry the steel balls post-passivation to prevent water stains or surface spots.
Ventilation Equipment: Essential for providing adequate ventilation due to the potential production of irritating gases during the passivation process.
Passivation Process Steps：
Pre-treatment: Prior to passivation, steel balls often undergo pre-treatment, including degreasing and pickling, to remove oil, scale, and other surface contaminants.
Passivation Treatment: Immersing the steel balls in the passivation solution. The solution composition and treatment duration are adjusted based on the material and desired protection level.
Water Rinsing: Thoroughly rinsing the passivated balls to remove any remaining acid on the surface.
Neutralization: Typically employing an alkaline solution to ensure all residual acid is completely neutralized.
Drying: Rapid drying of the washed and neutralized steel balls to prevent spots or issues that could affect subsequent processes.
Advantages and Disadvantages of the Passivation Process
Advantages:
Significant improvement in the anti-corrosion properties of the steel balls, making them suitable for various corrosive environments.
Enhanced surface finish following passivation, which helps reduce wear.
High adaptability to different alloys and types of stainless steel through parameter adjustments.
Disadvantages:
The durability and thickness of the passivation film may vary, requiring strict control of process parameters.
Summary：
The passivation process is a crucial step in enhancing the corrosion resistance and extending the service life of steel balls. Despite the requirement for stringent safety and environmental measures, its role in improving product performance and stability is irreplaceable. Continuous technological advancements and process optimizations can mitigate the environmental impact of traditional passivation processes, promoting the widespread adoption of this technology.